Continental Aerospace Technologies announces a new Prime drop-in Engine Replacement for the Cessna 172

Continental Aerospace Technologies announces a new Prime drop-in Engine Replacement for the Cessna 172

OSHKOSH, July 22, 2019 – Continental, an AVIC International Holding (HK) LTD company (HKEX: 232.HK), announces a new STC to install a Prime IO-370-D3A3 engine into Cessna R and S series 172s.

The economical, fuel-injected four-cylinder power-plant is an economical option to replace the original engine at TBO for 180 hp Cessna 172 R and S models.

The Prime IO-370-D3A3 delivers 180 hp, includes roller tappets and comes with a recommended TBO of 2,200 hours that extends to 2,400 hours for high utilization aircraft. 

The STC includes the engine, a Bendix impulse coupled ignition system to provide improved starting and reduced magneto maintenance, a starter, fuel system and associated STC paperwork to complete the installation on Cessna 172s currently using a Lycoming IO-360-L2A engine. 

The STC is priced at $27,226, delivering a factory new replacement engine at a level approaching that of field overhauls.

“As always, Continental is committed to bring more value to General Aviation. Our Prime IO-370 is a factory new engine with a factory new engine warranty, priced at a point that makes you wonder why you would overhaul your current engine,” said Chris Kuehn, Vice-President, Sales, Marketing and Customer Support, Continental.

“Add to this our customer focus, and you have a solution that will be favored by fleet operators and owners alike. This is why we fly with you,” Kuehn continued.

The complete kit is available to order today, with deliveries starting in September 2019. 

Continental’s regional sales managers are immediately available to help customers place orders and plan deliveries. Visit


Creating a “Mountain Goat” 182, Step One: Off-airport Landing Gear

Creating a “Mountain Goat” 182, Step One: Off-airport Landing Gear

With a successful top-end inspection completed, STEVE ELLS guides a new owner through the first steps to make his Cessna 182 a reliable backcountry plane.

Bill hangars his 1966 Cessna 182J Skylane in the hangar next to mine at the Paso Robles Municipal Airport (KPRB).

Bill is tall, drives a pickup, is comfortably retired—and enjoys flying. He has owned his 182 for four years. It has carried him on cross-country flights to Kansas, Phoenix and San Diego. Since I’ve known him, it seems most of his flights consist of short day-VFR trips to take his wife for lunch.

Last September I saw that Bill’s hangar was open, so I stepped over to catch up. Bill told me that Greg, who was there with him, wanted to buy his airplane. 

Bill hadn’t mentioned wanting to sell. Interested, I listened. 

Bill introduced me as a guy that knew a lot about Cessna 182s. Greg wanted my opinion on the engine in Bill’s airplane, since Bill had told him it had 1,720 hours since its last rebuild. In other words, it was 20 hours past what the manufacturer, Continental Motors, printed as the recommended TBO. 

Bill told him that the engine was running fine; it always started right up, made good power, the oil analyses were always clean and that it had been well taken care of. Bill asked me to inspect the engine to determine if it was airworthy. I agreed to take on that task since the protocol is well defined.

Continental cylinder inspection

In 2016, Continental Motors released Publication M-0, “Maintenance Manual: Standard Practice for Spark Ignition Engines.” This manual is the go-to source for guidance when performing inspections, maintenance and diagnosis on Continental piston aircraft engines. (Make sure you have the most current revision. At press time, the latest iteration is dated July 2017. —Ed.)

Chapter 6-4.11 is titled “Cylinder Inspections.” Sub-chapters include visual inspections, differential compression tests, cylinder borescope inspections, cylinder-to-crankcase mounting inspections, baffle inspections and cowling inspections.

I use both a differential compression test with calibrated orifice and a borescope to determine cylinder health as mandated by M-0. Since the guidelines in the M-0 differential compression chapter differ greatly from the guidelines in FAA Advisory Circular AC 43.13-1B, titled “Acceptable Methods, Techniques, and Practices – Aircraft Inspection and Repair,” these tools are essential when conducting the Continental cylinder testing. 

I own an Eastern Technology E2M differential compression tester. Aircraft Tool Supply also sells a house-branded differential pressure tester, which they call the 2EM.

I used a VA-400 rigid USB borescope from Oasis Scientific to inspect the valves in accordance with the M-0 protocol. This borescope connects to my laptop which allows me to create a file for storing photographs of everything I see during the inspection.

I performed the inspections of the cylinders in accordance with the chapter and found the compression readings acceptable at 72, 70, 72, 70, 68 and 72/80. A thorough “scoping” inside each cylinder showed no scoring on the cylinder walls, normal lead deposits on the piston crowns and no indication of any valve problems. 

In addition to the cylinder inspection chapter, M-0 also provides guidelines for determining if there are excessive combustion gases escaping past the rings. The test procedures are in Chapter 8-9.1. Bill’s engine also passed this test.

Based on these tests, I concluded that the top end of the 230 hp O-470-R engine in Bill’s airplane was airworthy. Within a week, Greg and Bill had agreed on a price and the airplane (and the hangar) changed hands. 

Greg’s goal

Greg owns a contracting business on the central coast of California. His business is thriving, and he works hard. When he can get away, he enjoys spending time at his cabin high up in the Monache Meadows Wildlife Area in the Sierra Nevada. 

He told me he yearned to get his family, including his 92-year-old mother, up to the cabin often but hasn’t been able to because of the nearly seven-hour drive to get there. Greg figures a flight in his 182 will take no more than 90 minutes. There’s just one catch: the only landing strip is a gravel/sand runway on the edge of a dry lake at 8,000 feet msl. 

I asked Greg why he bought Bill’s 182. Here’s what he said: “Lots of things. The two doors allow me to have my 92-year-old mother go along—it would be too difficult to hop over her in a Piper Warrior/Cherokee.”

“The 182 has horsepower to deal with high altitude better,” he continued. “The 182 is wider and carries a larger payload; my family are all tall and large people.”

“The high wings allow me to clear tall brush on the side of runways: Lone Pine (O26, located 40 miles south of Bishop) was scary with the Warrior I used to own.”

Greg put in a great deal of thought and flight time preparing to fly in to O26 this summer after the snow melts. Within a few weeks after the sale, he had flown to the east side of the Sierra and hired Geoff Pope, a CFI based at the Bishop, California airport (KBIH) for mountain flying instruction. He also took his 182 to the Big Bear City Airport (L35) to learn how it handles doing touch-and-goes at 6,732 feet msl. 

Big tires

During our initial conversations, I suggested that Greg set aside some cash to install a bigger nose tire since his 1966 182 didn’t come from the factory with the left and right firewall reinforcing channels. 

These channels, which reduce the odds of bending the firewall, can be retrofitted to all 1962 through 1970 aircraft by incorporating Cessna service kit SK182-44C in accordance with single engine service letter SE71-5. The kit had not been installed on Greg’s airplane. Cessna installed the channels at the factory beginning in early 1970 with Serial No. 182 60291. (For more information on firewall reinforcement, see Steve’s Q&A column in the January 2018 issue of Cessna Flyer. —Ed.)

I told Greg that his 182J was a good airplane and that it could safely operate out of the strip by his cabin if he factored in variables such as winds aloft, density altitude, weight and balance and was prudent about risk management. 

We decided that the most immediate step in converting his 182 for safely flying into high-altitude unimproved strips like the one near his cabin was to install bigger tires. 


Nose fork upgrade

The standard sized nose tire for 182s like Greg’s is a 5.00-5 tire with a 6-ply rating. During my search for bigger tire solutions, I found that the Cessna parts manual does show the parts for what’s called a Heavy-Duty Nose Gear installation for a 6.00-6 tire, but it requires a different hub and nosegear barrel assembly. 

During Greg’s research, an acquaintance suggested that a Cessna 310 nosegear strut and fork would work. 

Due to the time and expense of searching out parts and approval for the installation of surplus or salvage parts, we decided to seek the advice of Jim Hammer at Airglas Engineering in Anchorage, Alaska. 

Airglas sells an STC-approved large nosegear fork that can be installed on all existing nose landing gear barrels. Large nose forks are available for Cessna singles from the 150 through the 207 and for Piper singles including PA-28-140 through -235, and PA-32-260 and -300. The kit includes the large fork, a new axle and a new strut block. 

The Airglas website contains drop-down menus for each approved model. Topics include pictorial installation instructions, EASA approval docs, STC docs and detailed step-by-step installation instructions.

Greg and I liked what we heard from Airglas and placed an order with Hitchcock Aviation in Star, Idaho. They assembled all the needed hardware, STCs and installation instructions before shipping the package to Greg. 

Jesse Bennett, a local A&P, removed the front strut assembly and disassembled it. A machinist cut the strut tube in accordance with the Airglas instructions and installed the mounting block on the strut. Next, the fork was bolted on and an 8.00-6 6-ply tire and new tube were mounted on a new Cleveland 40-75D wheel assembly. The nosegear strut was reassembled and serviced.

That took care of increasing the footprint of the nose tire. What about the mains?


Working on the mains

The nosewheel assembly, two new heavy-duty double-puck black anodized brake assemblies (Alaskan Bushwheel Part No. 30-52N) and the installation and Instructions for Continued Airworthiness (ICA) manual were purchased from AirFrames Alaska. Installation approval for the wheels and brakes is by Supplemental Type Certificate (STC) SA02231AK held by F. Atlee Dodge in Anchorage, Alaska. 

Greg bought 8.50-6 tires and new tubes for the main landing gear. Parts and approval costs totaled just under $6,000. The strut modification, the installation of the new larger brakes, the block and fork, and the new tires and tubes all happened over the course of one day with hours to spare. 

The new landing gear parts add about 25 pounds to Greg’s aircraft empty weight. The bigger tires and beefier gear also increase drag—so he won’t see the normal 135-knot cruise speeds. But he will be spending more weekends with his family in the mountains; not a bad exchange.

The larger tires provide around 4 more inches of ground clearance and a larger tire footprint. The increased “float” of the larger nose tire drastically reduces the odds of nosegear (and firewall) damage due to uneven runway surfaces. 

After May, when all the snow has melted and the “runway” has dried out, I expect to see Greg gently settling his mother into the copilot seat of his “mountain goat” 182. Next stop: a cabin high up in the Sierras. 

Greg bought an airplane that fit his mission’s needs—and then modified it to increase utility and safety. As a result, he can continue to devote the time needed to care for his contracting customers and spend more “cabin” time with his family. Isn’t that what airplanes are for?


Know your FAR/AIM and check with your mechanic before starting any work.

Steve Ells has been an A&P/IA for 44 years and is a commercial pilot with instrument and multi-engine ratings. Ells also loves utility and bush-style airplanes and operations. He’s a former tech rep and editor for Cessna Pilots Association and served as associate editor for AOPA Pilot until 2008. Ells is the owner of Ells Aviation ( and lives in Templeton, California, with his wife Audrey. Send questions and comments to



Aircraft Tool Supply Company
Eastern Technology Corp.
Oasis Scientific, Inc.
Airglas Engineering 
Hitchcock Aviation, LLC
AirFrames Alaska
STC SA02231AK 
F. Atlee Dodge


Publication M-0, “Maintenance Manual: Standard Practice for Spark Ignition Engines”
Continental Motors Group


FAA Advisory Circular AC 43.13-1B
“Acceptable Methods, Techniques, and Practices – Aircraft Inspection and Repair”
Cessna Single Engine Service Letter SE 71-5 under “Magazine Extras”
Record-Breaking Attendance Expected at the 14th Annual Gathering at Waupaca

Record-Breaking Attendance Expected at the 14th Annual Gathering at Waupaca

40+ Aviation companies step up with sponsorships, door prizes and seminars. 

Cessna Flyer and Piper Flyer Association members will be descending on Waupaca, WI for the 14th annual Gathering at Waupaca. Members from 20 states and Canada will spend the weekend relaxing, learning and mingling before boarding the air-conditioned motor coach to AirVenture on MondayTuesday and Wednesday with an optional night bus on Wednesday to accommodate viewing the night air show. 

Seminars for this year:

Electronic Ignitions by Michael Kobylik, Electroair; Brake Systems by Vern Rogers, Parker Hannifin; De-icing Principals by Ken Heath, UTC Aerospace; Getting the Most from your Engine by Neil George, Continental Motors; Fuel System Maintenance by Kurt Hartwig, Eagle Fuel Cells; Owner Performed Maintenance by Steve Ells, Contributing Editor. Meals, the bus ride and a full slate of seminars are all included in the event and the friendships formed last through the years. 

Save the date and plan to join us next year: Jul 20–21, 2019. Three exciting seminars are already booked for 2019 with more to come.

Platinum/Bus Sponsors

Tempest Plus |

 Electronics International |

 Univair |


T-shirt Sponsor

 Continental Motors |

Goodie Bag Sponsor

 Tanis |


Banquet Sponsor

SCS Interiors |


Bronze Sponsor

Air Capitol Dial |


Proud Supporters

 Aircraft Spruce & Specialty |

 AOPA Insurance |

City of Waupaca |

 Electroair |

 Flight Resource |

 Lycoming |

Mountain High Oxygen Systems |

Smooth Power |

Turbine Conversions |


Door Prizes:

Aerial Sim Training |

 Aero LEDs |

 Aerox |

Aircraft Spruce |

 AvBlend |

Bruce's Custom Covers |

 CiES |

 Concorde Battery |

 David Clark |

 Guardian Avionics |

 Great Lakes Aero Products |

 Icom |

JP Instruments |

Lycoming |

Lyons Studios |

McFarlane Aviation |

 Oasis Scientific |

 Parker |

Pilot Communications USA |

 Precise Flight |

Smooth Power |

 Sporty's |

Strut Wipe |

 Superbird |

 Superior Air Parts |

Turbine Conversions |

Van Bortel |

Vantage Plane Plastics |

Wag-Aero |

 Whelen |

Superior Air Parts Educational Forums at Aeroshell Oshkosh 2018 Forum Series

Superior Air Parts Educational Forums at Aeroshell Oshkosh 2018 Forum Series

Superior’s V.P. product support, Bill Ross (A&P/IA) will present two forums: Owner’s Guide to Engine Operations and Maintenance, and Engine Leaning Made Simple at the AeroShell Tent (#450) during Oshkosh/AirVenture 2018.

Coppell, TX (June 25, 2018)  — Scott Hayes, vice president, sales and marketing for Superior Air Parts, Inc., announced today that the company has accepted an invitation to be a presenter during the new AeroShell Forum series during Oshkosh AirVenture 2018.

AeroShell will host a series of forums on topics ranging from engine care to unleaded avgas. Follow them on Twitter @Shell_Aviation or visit the EAA Oshkosh AirVenture 2018 Schedule of Events at for updates.

Superior’s vice president of Product Support, Bill Ross, who has been an FAA A&P/IA for 33-years, will present two educational forums. Ross will present “Owner’s Guide to Engine Operations and Maintenance” on Tuesday, July 24, and “Engine Leaning Made Simple on Friday, July 27.” 

Both presentations will begin at 1:00 and be held at the AeroShell tent (#450), which is directly across from the AOPA exhibit.

“Superior Air Parts is extremely excited to be a part of the AeroShell Oshkosh Forum series,” Hayes said. “Helping pilots save money has been our philosophy for over 50 years and educating pilots on the many ways they can more efficiently operate their engines has proven to be a very effective way to do that.” 

Hayes also said that along with the two forums at the AeroShell tent, Ross will also be hosting the Superior Air Parts Oshkosh Forums. The free, 45-minute Forum sessions will be held daily at the Superior Air Parts tent (#257), which is just north of Hangar B. Forum times are 9:3011:00 and 12:30, Monday, July 23rd through Saturday, July 28th.  

In addition to all the other valuable information, all forum attendees will receive a free digital copy of Bill Ross’ popular 144-page book, “Engine Management 101.”

For more information and complete forum schedule, visit: www.

About Superior Air Parts, Inc.

Superior Air Parts, Inc., is a wholly owned subsidiary of the Superior Aviation Group. Founded in 1967, Superior Air Parts is the leading manufacturer of FAA approved aftermarket replacement parts for Lycoming and Continental aircraft engines. In addition, the company manufactures the FAA certified Vantage Engine and the XP-Series Engine family for experimental and sport aircraft builders. For more information, visit:


Dale Smith

Media Relations Representative 

Superior Air Parts, Inc.


The Care and  Feeding of Diesel-Fueled  Aircraft Engines

The Care and Feeding of Diesel-Fueled Aircraft Engines

September 2015

Three diesel engine experts explain what’s required to keep a diesel engine running well.

No spark plugs, no plug wires, no magnetos; no wonder diesel engines require less service than an Avgas engine.

In spite of the fact that these engines have a lot of advantages over an Avgas-fueled engine, today in the United States only one OEM sells a diesel-powered airplane. (Cessna Aircraft stopped taking orders for its 182 JT-A diesel engine Skylane last spring, and the project appears to be on hold. —Ed.)